Web Menu
Product Search
Language
Share

Wholesale Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor

Home / Products / Wood Veneer Acoustic Panels / Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor
  • Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor
  • Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor
  • Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor
  • Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor
Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor

Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor

Spesonic Acoustic Wood Veneer Slat Wall Panels represent a specialized architectural solution within the Wood Veneer Acoustic Panels category, designed to manage sound reflections while providing a natural wood aesthetic. Each panel is constructed from parallel MDF or solid wood slats bonded to a high-density acoustic polyester felt backing. This composite structure works by allowing sound waves to pass through the gaps between the slats, where they are absorbed by the porous felt material, significantly reducing reverberation and echo in interior spaces. The surface is finished with a real wood veneer, maintaining the authentic grain and texture of timber while meeting the technical requirements for noise reduction coefficients (NRC) in modern construction.

Get a Quote
PREV: No previous article NEXT:Wood Veneer Grooved, Polygonal Sound-absorbing Wall Panel, Applicable to Hotels and Offices

Spesonic Acoustic Wood Veneer Slat Wall Panels

Interior wall and ceiling decor | Polyester fiber + wood veneer construction
Standard sizes 1220×2420×10mm / 1220×2420×13mm
Thickness options 9mm / 12mm
Density grades 1900g/m² / 2400g/m²
Color finishes 8 standard / custom matching
Surface layer
Natural wood veneer provides grain texture and surface hardness. Available in 8 standard wood species or custom color staining.
Acoustic core
Polyester fiber base with open-cell structure. Density selection (1900/2400 g/m²) determines sound absorption coefficient. The core provides mildew resistance and moisture stability.
1900g/m² configuration
NRC 0.55 – 0.65
Optimal range: 500Hz – 4000Hz
Meeting halls · Offices · Libraries · Classrooms · Reading rooms
2400g/m² configuration
NRC 0.70 – 0.85
Extended range: 400Hz – 4000Hz
Theaters · Music halls · Piano rooms · Gyms · Manufacturing shops
Mildew-resistant
Polyester fiber formulation resists fungal growth. Suitable for interior walls in varying humidity conditions including hotel corridors and kindergarten spaces.
Moisture-resistant
Dimensional stability maintained up to 85 percent relative humidity. Wood veneer surface sealed to prevent edge swelling.
Fireproof
ASTM E84 Class A rating. Flame spread index below 25. Suitable for commercial interiors requiring fire-rated materials.
Eco-friendly Recycling
Polyester fiber core contains recycled content. Panels fully recyclable after service life. Wood veneer sourced from managed plantations.
Application field guide
Public assembly
Meeting hall · Theater · Music hall
Commercial & industrial
Gym · Manufacturing shop · Office · Hotel
Education & quiet zones
Library · Reading room · Classroom · Kindergarten · Piano room
Full specifications
Product name Spesonic Acoustic Wood Veneer Slat Wall Panels
Material composition Polyester fiber core + natural wood veneer surface
Standard dimensions 1220×2420×10mm / 1220×2420×13mm
Custom dimensions Available upon request
Thickness range 9mm · 12mm
Density selection 1900g/m² · 2400g/m²
Color options 8 standard wood veneer finishes; custom staining available
Wall mounting
  • Direct adhesive application to clean, dry, leveled wall surface
  • Mechanical fixing through wood veneer using countersunk screws
  • Z-clip system for removable panel assemblies
  • Stagger panel joints for continuous slat appearance
Ceiling installation
  • Suspended grid integration for 1220×2420mm modules
  • Backing substrate recommended for direct ceiling mount
  • Minimum support spacing 600mm for 12mm thickness panels
  • Seal cut edges with edge sealer to prevent moisture ingress
Technical questions
What is the difference between 9mm and 12mm thickness?
9mm panels absorb primarily mid-to-high frequencies (500Hz-4000Hz). 12mm panels extend absorption bandwidth slightly lower (from 400Hz). For spaces with speech clarity as primary concern (classrooms, offices), 9mm is sufficient. For music venues or theaters, 12mm provides broader frequency coverage.
How does wood veneer affect acoustic performance compared to fabric?
The wood veneer layer is acoustically transparent due to micro-perforations or slat gaps in typical installation. Sound waves pass through the veneer into the polyester fiber core where absorption occurs. The veneer adds surface durability and cleanability while maintaining approximately 90-95 percent of the core's raw absorption coefficient.
Can these panels be installed over existing drywall?
Yes. Existing drywall serves as a suitable substrate. Ensure surface is clean, dry, and free of loose paint. For best acoustic performance, maintain a 10-20mm air gap between panel back and drywall; this increases low-frequency absorption by up to 15 percent.
What maintenance is required for the wood veneer surface?
Dry dust weekly with soft cloth or vacuum brush attachment. Spot clean with slightly damp cloth using mild soap. Avoid abrasive cleaners or excessive water. The factory-applied finish resists minor stains; re-oiling or re-lacquering may be needed after 5-7 years in high-touch areas.
Are custom colors available beyond the 8 standard options?
Yes. Custom color matching requires minimum order quantity (typically 200 panels) and adds 10-15 working days. Custom staining can be applied to the wood veneer surface before lamination. Provide RAL, NCS, or physical sample for matching.
Fire rating: ASTM E84 Class A
Moisture resistance: ASTM D3273
Mildew resistance: ASTM G21
Recycled content: up to 60 percent

Product Features

Product Name

Wood veneer acustic panels                                    

Material

Polyester fiber+wood veneer                                                         

Size

1220*2420*10mm 1220*2420*13mm Customizable                                                                 

Colors

8 or customized                                                                  

Thickness

9mm, 12mm                                                       

Density

1900g/m2, 2400g/m2                                                              

Feature

Mildew-resistant, Moisture-resistant, Fireproof, Eco-friendly Recycling                                                     

Application

Meeting hall, theater, music hall, gym, manufacturing shop, office,  hotel, Library, reading room ,classroom, kindergarten, piano room etc
About Us
Yayin New Materials Jiangsu Co., Ltd.
Yayin New Materials Jiangsu Co., Ltd.

Yayin New Materials Jiangsu Co., Ltd. is headquartered in Lianyungang, Jiangsu Province, and has two branch factories located in Huzhou City, Zhejiang Province and Nanchang City, Jiangxi Province, with a total area of ​​more than 30,000 square meters.

Yayin is China Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor Suppliers and Wholesale Spesonic Acoustic Wood Veneer Slat Wall Panels for Interior Wall and Ceilings Decor Factory. We specializes in the research, development, production and sales of carbon-neutral polyester fiber antibacterial sound-absorbing materials. It uses needle-punched non-woven technology to make recyclable polyester materials into environmentally friendly panels that are sound-absorbing, flame-retardant, heat-insulating and decorative.

The noise reduction coefficient (NRC) reaches 0.85, and the flame retardant effect reaches the A level of the US standard ASTM E84, the B level of the EU standard EN13501-1, and the A level of the EU standard UL723-2018. The formaldehyde emission test reaches the E0 level of the national standard.

Yayin has passed the quality management system certification (ISO9001) and the environmental management system certification (ISO14001).

Certificate Of Honor
  • A lifting table with angle adjustment function
  • A lifting table with angle adjustment function Authorization
  • A seat with an adjustable sunshade structure Registration form
  • A seat with an adjustable sunshade structure Authorization
  • A modular material that can be assembled. Registration form
  • A modular material that can be assembled
  • A modular sound-absorbing material for wall decoration Registration form
News
Related products